Shelco Filters - Data Sheets

Technical Data Sheets / Spec Sheets for Shelco Filter Products

Shelco Filter Bag Housings

BF Series Single Bag Housings Technical Data Sheet (PDF)
Shelco's BF series bag filter housings were designed for industrial and commercial applications, with 316L stainless, 304L stainless, and carbon steel options for a wide range of chemical compatibilities. These are vailable in 4 sizes with tons of customization options.

BFS Series Multi-Bag Housings Technical Data Sheet (PDF)
Shelco's multi-bag filter housings can carry from 2 to 6 bags, allowing for higher flow rates. Optional 134 epoxy coating is available for seawater or corrosive applications. This series has endless customization options, so you can outfit your housing however you want.

Shelco Filter Cartridge Housings

4FOS and 5FOS Series Multi-Cartridge Filter Housings Technical Data Sheet (PDF)
These series were designed for general purpose industrial and commercial filtration needs, with heavy-duty 304L or 316L stainless steel construction that provides maximum durability and corrosion resistance. These models hold 4 or 5 cartridges.

7FOS Universal Multi-Cartridge Filter Housings Technical Data Sheet (PDF)
These heavy-duty 7-cartridge housings have either V-band clamp or swing bolt closures for quick and easy cartridge changeouts and secure sealing. Their universal seats accept DOE (double open end) and 222 style cartridges standard.

12FOS and 22FOS Series Multi-Cartridge Filter Housings Technical Data Sheet (PDF)
These two series of multi-cartridge filter housings hold 12 or 22 cartridges each, delivering flow rates up to 616 GPM on a wide range of industrial and commercial filtration needs. They hold 30" or 40" cartridge lengths in DOE (double open end) style. Adapters for other styles are available.

36FOS and 52FOS Series Multi-Cartridge Filter Housings Technical Data Sheet (PDF)
These high-capacity filter housings support enormous flow rates, with some models being able to process 1040 GPM. Constructed from 304L or 316L stainless steel, these filter housings have kife edge seals which eliminate bypass on DOE (double open end) cartridges.

CSF Series Single Filter Housings with Ring Nut Closure Technical Data Sheet (PDF)
The CSF series holds one SOE (single open end) cartridge with a 222 or 226 connector and Fin or Flat ends. The housing's ring nut closure allows for quick cartridge changeouts. This space-efficient housing includes a mounting bracket kit and wrench.

FAS and FAC Series Single Cartridge Filter Housings with Bolt & Nut Closure Technical Data Sheet (PDF)
These single filter housings accept double open-end (DOE) cartridges in multiple sizes. These versatile housings are available in many materials, including 304L SS, 316L SS, nickel-plated brass, and cast iron for a wide range of process requirements.

FLD Series High Flow Single Cartridge Filter Housings with Ring Nut Closure Technical Data Sheet (PDF)
Shelco's FLD series of cartridge housings are built for high flow with a single cartridge. This series can get up to 25 GPM ratings through its 1" FNPT inlet and outlet. Numerous gasket options are available for compatibility with most fluids.

FOS, FOSBN, and FOC Series Single Cartridge Filter Housings Technical Data Sheet (PDF)
These versatile single cartridge filter housings are available with 1/4", 3/8", 1/2", 3/4", or 1" connections, for easy integration into almost any system. Popular aplications for the FO series are water, chemicals, desalination, oil/gas, pulp/paper, and more.

HF & UHF Series High Flow Multi-Cartridge Housings Technical Data Sheet (PDF)
These high flow multi-cartridge housings are available in 3-, 4-, 7-, and 12-cartridge capacity models. The 40" or 60" length unit is available in heavy-duty 304L or 316L stainless steel for maximum durability and corrosion resistance.

MicroVantage HPI Series High Purity Multi-Cartridge Industrial Filter Housings Technical Data Sheet (PDF)
When you need high purity filtration, you turn to Shelco's MicroVantage line. The HPI series of multi-cartridge housings holds 4 to 21 cartridges for optimal choice of flow rates (26 to 616 GPM). Inlets/outlets are available in 2", 3", or 4" depending on housing capacity.

RH Series Single Cartridge Filter Housings with Ring Nut Closure Technical Data Sheet (PDF)
The Shelco RH Series has a secure ring nut closure and several options of gasket materials (Buna N standard), allowing it to have a maximum operating pressure of 300psi. It also has a spring-loaded knife edge seal which provides positive sealing for varialbe length cartridges.

MicroVantage SFH Series Sanitary Filter Housings Technical Data Sheet (PDF)
When you need high purity filtration, you turn to Shelco's MicroVantage line. The SFH series are designed for critical applications requiring high purity and durability. These housings are ideal for ultrapure water, fine chemicals, electronics, pharmaceuticals, and more.

SPH Series Plastic Filter Housings Technical Data Sheet (PDF)
Shelco's SPH Series of cartridge housings hold standard 2-1/2" and 4-1/2" diameter cartridges in 10" and 20" lengths. This Big Blue style makes these plastic housings an economical alternative to metal filter housings in low pressure/cold water applications.

USF Series ASME Code Multi-Cartridge Filter Housings Technical Data Sheet (PDF)
The USF series of multi-cartridge filter housings are made with ASME "U" code design for commercial and industrial filtration needs. Its top spring seals allow for variations in cartridge length. Available in 4- to 52-cartridge models.

VPH Series High Purity Virgin Polypropylene Housings Technical Data Sheet (PDF)
These filter housings are constructed from 100% virgin polypropylene, providing an economical alternative for high purity application. The VPH series also has a rugged design that provides long, trouble-free service with 10" or 20" long cartridges.

Shelco Filter Elements

HFC Series High Flow Cartridge Filters Technical Data Sheet (PDF)
Shelco's High Flow Cartridges are designed for industrial and commercial filtration at an economic price and exceptional value with all-polypropylene construction. With 98% retention ratings from 0.5 to 70 microns, these filters are great for many types of applications.

MicroSentry™ HTF Series Filter Bags Technical Data Sheet (PDF)
These MicroSentry #1, #2, #3, and #4 size bags fit most major manufacturers' housings. With a huge range of pore sizes (from 1 to 1,500 microns) and material options (polypropylene, polyester, Nylon, and more), the HTF series is extremely versatile.

MicroSentry™ MB Series Melt Blown Filter Cartridges Technical Data Sheet (PDF)
Shelco's MicroSentry MB cartridges are made of melt blown polypropylene for micron ratings from 1 to 100 microns. These filters are available in 4-7/8", 10" (9-7/8"), 20", 30", and 40" lengths for maximum compatibility in a almost any brand of housing.

MicroSentry™ MEE Series Economical Pleated Filter Cartridges Technical Data Sheet (PDF)
The MEE series of economical pleated filter cartridges have a simple yet effective pleated design that delivers high surface area. This means you get greater dirt-holding capacity, lower initial pressure drop, and longer intervals between changeouts.

MicroSentry™ MS Series Wound Filter Cartridges Technical Data Sheet (PDF)
The MicroSentry MS Series uses precision winding patterns to ensure accurate filtration ratings and high retention efficiencies. Shelco's state-of-the-art computerized production machinery eliminates product variability and catches particles as small as 0.5 microns.

MicroSentry™ SCB Series Carbon Block Filter Cartridges Technical Data Sheet (PDF)
The SCB series uses an extruded activated carbon block filter for high adsorptive capacity. These filters effectively reduce chlorine and unwanted organic chemicals that can contribute to undesirable tastes and odors. These are competitively priced when compared to Granular Activated Carbon (GAC) cartridges.

MicroSentry™ SS Series Stainless Steel Filter Cartridges Technical Data Sheet (PDF)
When you need to filter high-temperature fluids, you need something tougher than polypropylene filters. These stainless steel filter cartridges can handle temperatures up to 500F and differential pressures up to 60psid.

MicroVantage™ MAN Series Nylon 66 Membrane Filter Cartridges Technical Data Sheet (PDF)
These Nylon 66 membrane cartridges are designed for precise filtration as low as 0.1 microns. Each 10 inches of filter length contains 7.2 sq. ft. of media surface area, so these filters have large capacity and rarely need changeouts.

MicroVantage™ MAS-B Series Polyethersulfone Membrane Filter Cartridges Technical Data Sheet (PDF)
These MAS-B cartridges are beverage grade, designed specifically for beverage filtration. with absolute retention ratings from 0.1 to 1.2 microns, these membrane filters comply with the FDA's CFR criteria for food & beverage contact.

MicroVantage™ MAS-E Series Polyethersulfone Membrane Filter Cartridges Technical Data Sheet (PDF)
These electronic-grade membrane filter cartridges are made of high quality polyethersulfone and polypropylene. With 0.03 to 0.65 micron ratings, it doesn't get much better than these MAS-E filters. Comply with the FDA's CFR criteria for F&B contact and USP Class VI Biological Test for plastics.

MicroVantage™ MAS-G Series Polyethersulfone Membrane Filter Cartridges Technical Data Sheet (PDF)
These general grade membrane filters are manufactured in a Class 10,000 Clean Room environment for high purity. They meet USP Class VI Biological Test for plastics and comply with the FDA's CFR criteria for food & beverage contact.

MicroVantage™ MAS-P Series Polyethersulfone Membrane Filter Cartridges Technical Data Sheet (PDF)
The MAS-P pharmaceutical grade series has a membrane made of double-layered polyethersulfone, allowing for absolute retention of 0.1, 0.2, or 0.45 microns. Gaskets/O-rings are available in silicone, Buna N, EPR, Viton, or teflon-encapsulated Viton.

MicroVantage™ MAT Series PTFE Membrane Filter Cartridges Technical Data Sheet (PDF)
If you want precision filtration for a wide range of applications, try the MicroVantage MAT series of PTFE membrane filter cartridges. They fit in most types of filter housings, with lengths of 9-3/4" to 40" and diameters of 2-2/3".

MicroVantage™ MDP Series High Performance Pleated Polypropylene Filter Cartridges Technical Data Sheet (PDF)
These high performance pleated filters have Absolute-Rated Beta 5000 (99.98%) retention efficiency from 0.2 to 50 microns. This means that practically nothing gets through. This series is available with various end cap configurations to fit existing housings.

MicroVantage™ MPA Series Pleated Polypropylene Filter Cartridges Technical Data Sheet (PDF)
The MPA series is absolute rated for 99.98% retention efficiency. The pleated polypropylene filter media is rated for 0.2 to 50 microns at that 99.98% efficiency. Gaskets are available in Buna N, EPR, Viton, and Teflon Encapsulated Viton.

MicroVantage™ MPN Series Pleated Polypropylene Filter Cartridges Technical Data Sheet (PDF)
The MPN series contains pleated plypropylene filter cartridges that have nominally-rated beta 10 (90%) retention efficiency. The 100% polypropylene construction offers wide range of chemical compatibility and high throughput/particle retention.

MicroVantage™ MPX Series High Performance Pleated Polypropylene Filter Cartridges Technical Data Sheet (PDF)
These high performance pleated polypropylene filter cartridges are available in lengths from 9-3/4" to 40" and widths of 2-2/3". They should be changed out at 35psi differential pressure and should not be exposed to temperatures over 176F (80C).

MicroVantage™ MVS Series Polyethersulfone Membrane Filter Cartridges Technical Data Sheet (PDF)
These MicroVantage MVS series membrane filters have sterilizing grade polyethersulfone media. They are made in a certified Clean Room environment, comply with FDA criteria, and meet USP Class VI Biological Test for plastics.

MicroVantage™ VGPS Series Hydrophobic Polysulfone Membrane Filter Cartridges Technical Data Sheet (PDF)
These VGPS series membrane filter cartridges are vent grade at 0.2 microns due to their hydrophobic nature. The hydrophobic polysulfone filter mediamakes them perfect for vent use. Highly tapered asymmetric pore structure leads to excellent flow rate.

MicroVantage™ WGAS Series Polyethersulfone Membrane Filter Cartridges Technical Data Sheet (PDF)
These water grade filter cartridges have absolute retention ratings from 0.03 to 1.0 microns. The WGAS series provides cost-effective absolute filtration for less critical applications as well as wide chemical compatibility.

MicroVantage™ WGPS Series Polysulfone Membrane Filter Cartridges Technical Data Sheet (PDF)
The WGPS series contains filter cartridges with absolute retention ratings from 0.03 to 1.0 microns. Constructed out of polysulfone (filter media) and polypropylene (outer cage, inner core, end caps), this series provides excellent flow rate and dirt-holding capacity.

SJC Series Pleated Jumbo Cartridges Technical Data Sheet (PDF)
These pleated jumbo cartridges are available in 0.35 to 150 micron ratings in lengths from 9-5/8" to 30-3/4" and ODs of 7-3/4". The cartridge structure is made from polypropylene, including the filter media. Often used for process water, swimming pools, plating solutions, spas, and more.